#HOW-TO build KAME in Fedora 10.

#Use pirut or sudo yum -y install to get the following packages:
gsl-devel, fftw-devel, atlas-sse2-devel, libgfortran,
 ruby-devel, kdelibs-devel, kernel-devel,
 libtool-ltdl-devel, libart_lgpl, ftgl-devel and so on.
rpmdevtools
(ccache)

#Prepare for rpmbuild.
rpmdev-setuptree

#For linux-gpib
rpmbuild --define="kversion `uname -r`" --define='kvariants ""' --target=`uname -m` --rebuild linux-gpib-kmod-{ver}.src.rpm
rpmbuild --rebuild linux-gpib-{ver}.src.rpm
#Install the rpms: linux-gpib-{ver}.*.rpm, kmod-linux-gpib-{ver}-*.*.rpm
#For PCI(e) device(s), edit /etc/modprobe.d/modprobe.conf.local like the following.
alias char-major-160 gpib_common
alias gpib0 tnt4882
install tnt4882 PATH=/sbin:/usr/sbin:/usr/local/sbin:$PATH;modprobe --ignore-install tnt4882;sleep 3;gpib_config --minor 0

#see INSTALL.nidaqmx.fedora10 if you need National Instruments DAQmx support.

#w/o DAQmx, use option --define="build_nidaqmx 0"
rpmbuild -ba kame-*.spec or rpmbuild --rebuild kame-*.src.rpm
#install the rpm

#if you don't like rpm, see INSTALL.