My pulser driver. More...

#include <pulserdriversh.h>

Inheritance diagram for XSHPulser:

Classes
struct	Payload

Public Member Functions
	XSHPulser (const char *name, bool runtime, Transaction &tr_meas, const shared_ptr< XMeasure > &meas)

virtual double	resolution () const
	time resolution [ms]

Public Member Functions inherited from XCharDeviceDriver< XPulser >
	XCharDeviceDriver (const char *name, bool runtime, Transaction &tr_meas, const shared_ptr< XMeasure > &meas)

Public Member Functions inherited from XPulser
	XPulser (const char *name, bool runtime, Transaction &tr_meas, const shared_ptr< XMeasure > &meas)

virtual void	showForms ()
	shows all forms belonging to driver

const shared_ptr< XBoolNode > &	output () const

const shared_ptr< XComboNode > &	combMode () const

const shared_ptr< XComboNode > &	rtMode () const

const shared_ptr< XComboNode > &	numPhaseCycle () const
	How many cycles in phase cycling.

const shared_ptr< XDoubleNode > &	rtime () const
	Repetition/Rest Time [ms].

const shared_ptr< XDoubleNode > &	tau () const
	[us]

const shared_ptr< XDoubleNode > &	combPW () const
	PulseWidths [us].

const shared_ptr< XDoubleNode > &	pw1 () const
	PulseWidths [us].

const shared_ptr< XDoubleNode > &	pw2 () const
	PulseWidths [us].

const shared_ptr< XDoubleNode > &	combPT () const
	Comb pulse periodic term [us].

const shared_ptr< XDoubleNode > &	combP1 () const
	P1 and P1 alternative.

const shared_ptr< XDoubleNode > &	combP1Alt () const
	P1 and P1 alternative.

const shared_ptr< XDoubleNode > &	aswSetup () const
	Analog switch setting, setup(proceeding) time before the first spin echo.

const shared_ptr< XDoubleNode > &	aswHold () const
	Analog switch setting, hold time after the last spin echo.

const shared_ptr< XDoubleNode > &	altSep () const
	Separation time in DSO record, cause a shift of trigger of DSO in alternatively mode.

const shared_ptr< XDoubleNode > &	g2Setup () const
	Setup time of pre-gating port and QPSK.

const shared_ptr< XUIntNode > &	combNum () const
	of comb pulses

const shared_ptr< XUIntNode > &	echoNum () const
	of Spin echoes (i.e. pi pulses)

const shared_ptr< XBoolNode > &	drivenEquilibrium () const
	polarize spins after pulse sequence or not

const shared_ptr< XDoubleNode > &	combOffRes () const
	off-resonance comb pulses

const shared_ptr< XComboNode > &	combFunc () const
	Pulse Modulation.

const shared_ptr< XComboNode > &	p1Func () const
	Pulse Modulation.

const shared_ptr< XComboNode > &	p2Func () const
	Pulse Modulation.

const shared_ptr< XDoubleNode > &	combLevel () const
	[dB], Pulse Modulation

const shared_ptr< XDoubleNode > &	p1Level () const
	[dB], Pulse Modulation

const shared_ptr< XDoubleNode > &	p2Level () const
	[dB], Pulse Modulation

const shared_ptr< XDoubleNode > &	masterLevel () const
	[dB]

const shared_ptr< XBoolNode > &	induceEmission () const

const shared_ptr< XDoubleNode > &	induceEmissionPhase () const

const shared_ptr< XDoubleNode > &	qamOffset1 () const

const shared_ptr< XDoubleNode > &	qamOffset2 () const
	[F.S.]

const shared_ptr< XDoubleNode > &	qamLevel1 () const

const shared_ptr< XDoubleNode > &	qamLevel2 () const
	< Quadrature Amplitude Modulation. Amplitude compensation factor.

const shared_ptr< XDoubleNode > &	qamDelay1 () const

const shared_ptr< XDoubleNode > &	qamDelay2 () const
	< Delaying compensation [us].

const shared_ptr< XDoubleNode > &	difFreq () const
	[MHz]

const shared_ptr< XDoubleNode > &	qswDelay () const
	Q-switch setting, period after the end-edge of pulses [us].

const shared_ptr< XDoubleNode > &	qswWidth () const
	Q-switch setting, width of suppression [us].

const shared_ptr< XDoubleNode > &	qswSoftSWOff () const
	Q-switch setting, second pulse [us].

const shared_ptr< XBoolNode > &	qswPiPulseOnly () const
	Q-switch setting, use QSW only for pi pulses.

const shared_ptr< XBoolNode > &	invertPhase () const

const shared_ptr< XBoolNode > &	conserveStEPhase () const

const shared_ptr< XComboNode > &	portSel (unsigned int port) const

const shared_ptr< XBoolNode > &	pulseAnalyzerMode () const

const shared_ptr< XDoubleNode > &	paPulseRept () const

const shared_ptr< XDoubleNode > &	paPulseBW () const

const shared_ptr< XUIntNode > &	firstPhase () const
	0-3, selects the first phase of QPSK.

Public Member Functions inherited from XPrimaryDriver
	XPrimaryDriver (const char *name, bool runtime, Transaction &tr_meas, const shared_ptr< XMeasure > &meas)

Public Member Functions inherited from XDriver
	XDriver (const char *name, bool runtime, Transaction &tr_meas, const shared_ptr< XMeasure > &meas)

Public Member Functions inherited from XNode
	XNode (const char *name, bool runtime=false)

template<class T >
shared_ptr< T >	create (const char *name)

template<class T , typename... Args>
shared_ptr< T >	create (const char *name, bool runtime, Args &&...args)

template<class T >
shared_ptr< T >	create (Transaction &tr, const char *name)

template<class T , typename... Args>
shared_ptr< T >	create (Transaction &tr, const char *name, bool runtime, Args &&...args)

XString	getName () const

virtual XString	getLabel () const

XString	getTypename () const

shared_ptr< XNode >	getChild (const XString &var) const

shared_ptr< XNode >	getParent () const

void	setUIEnabled (bool v)
	Enables/disables controls over scripting/GUI.

void	disable ()
	Disables all scripting/GUI operations on this node hereafter.

Public Member Functions inherited from Transactional::Node< XNode >
bool	insert (Transaction< XNode > &tr, const shared_ptr< XNode > &var, bool online_after_insertion=false)

void	insert (const shared_ptr< XNode > &var)

bool	release (Transaction< XNode > &tr, const shared_ptr< XNode > &var)

void	release (const shared_ptr< XNode > &var)

void	releaseAll ()

bool	swap (Transaction< XNode > &tr, const shared_ptr< XNode > &x, const shared_ptr< XNode > &y)

void	swap (const shared_ptr< XNode > &x, const shared_ptr< XNode > &y)

XNode *	upperNode (Snapshot< XNode > &shot)
	Finds the parent node in shot.

Snapshot< XNode >	iterate_commit (Closure)

Snapshot< XNode >	iterate_commit_if (Closure)

void	iterate_commit_while (Closure)

void	print_ () const

	Node (const Node &)=delete

Node &	operator= (const Node &)=delete

Protected Member Functions
virtual void	changeOutput (const Snapshot &shot, bool output, unsigned int blankpattern)
	Sends patterns to pulser or turns off.

virtual void	createNativePatterns (Transaction &tr)
	Converts RelPatList to native patterns.

virtual double	resolutionQAM () const

virtual double	minPulseWidth () const
	minimum period of pulses [ms]

virtual bool	hasQAMPorts () const
	existence of AO ports.

Protected Member Functions inherited from XCharDeviceDriver< XPulser >
const shared_ptr < XCharInterface > &	interface () const

virtual void	open () throw (XKameError &)
	Be called just after opening interface. Call start() inside this routine appropriately.

virtual void	close () throw (XKameError &)
	Be called during stopping driver. Call interface()->stop() inside this routine.

void	onOpen (const Snapshot &shot, XInterface *)

void	onClose (const Snapshot &shot, XInterface *)

virtual void	closeInterface ()

Protected Member Functions inherited from XPulser
unsigned int	selectedPorts (const Snapshot &shot, int func) const

virtual void	start ()
	Starts up your threads, connects GUI, and activates signals.

virtual void	stop ()

virtual void	analyzeRaw (RawDataReader &reader, Transaction &tr) throw (XRecordError&)

virtual void	visualize (const Snapshot &shot)

tpulsefunc	pulseFunc (int func_no) const

int	pulseFuncNo (const XString &str) const

Protected Member Functions inherited from XPrimaryDriver
void	finishWritingRaw (const shared_ptr< const RawData > &rawdata, const XTime &time_awared, const XTime &time_recorded)

Protected Member Functions inherited from XDriver
void	record (Transaction &tr, const XTime &time_awared, const XTime &time_recorded)

Private Member Functions
int	setAUX2DA (Transaction &tr, double volt, int addr)

int	insertPreamble (Transaction &tr, uint16_t startpattern)

int	finishPulse (Transaction &tr)

int	pulseAdd (Transaction &tr, uint64_t term, uint32_t pattern, bool firsttime, bool dryrun)

Static Private Attributes
static const unsigned char	PATTERN_ZIPPED_COMMAND_DMA_END = 0

static const unsigned char	PATTERN_ZIPPED_COMMAND_DMA_COPY_HBURST = 1

static const unsigned char	PATTERN_ZIPPED_COMMAND_DMA_LSET_LONG = 2

static const unsigned char	PATTERN_ZIPPED_COMMAND_DMA_LSET_START = 0x10

static const unsigned char	PATTERN_ZIPPED_COMMAND_DMA_LSET_END = 0xffu

static const unsigned char	PATTERN_ZIPPED_COMMAND_END = 0

static const unsigned char	PATTERN_ZIPPED_COMMAND_WAIT = 1

static const unsigned char	PATTERN_ZIPPED_COMMAND_WAIT_LONG = 2

static const unsigned char	PATTERN_ZIPPED_COMMAND_WAIT_LONG_LONG = 3

static const unsigned char	PATTERN_ZIPPED_COMMAND_AUX1 = 4

static const unsigned char	PATTERN_ZIPPED_COMMAND_AUX3 = 5

static const unsigned char	PATTERN_ZIPPED_COMMAND_AUX2_DA = 6

static const unsigned char	PATTERN_ZIPPED_COMMAND_DO = 7

static const unsigned char	PATTERN_ZIPPED_COMMAND_LOOP = 8

static const unsigned char	PATTERN_ZIPPED_COMMAND_LOOP_INF = 9

static const unsigned char	PATTERN_ZIPPED_COMMAND_BREAKPOINT = 0xa

static const unsigned char	PATTERN_ZIPPED_COMMAND_PULSEON = 0xb

static const unsigned char	PATTERN_ZIPPED_COMMAND_DMA_SET = 0xc

static const unsigned char	PATTERN_ZIPPED_COMMAND_DMA_HBURST = 0xd

static const unsigned char	PATTERN_ZIPPED_COMMAND_SET_DA_TUNE_OFFSET = 0xe

static const unsigned char	PATTERN_ZIPPED_COMMAND_SET_DA_TUNE_LEVEL = 0xf

static const unsigned char	PATTERN_ZIPPED_COMMAND_SET_DA_TUNE_DELAY = 0x10

Additional Inherited Members
Public Types inherited from XPulser
enum	{ N_MODE_NMR_PULSER = 0, N_MODE_PULSE_ANALYZER = 1 }
	driver specific part below More...

enum	{ N_COMB_MODE_OFF = 0, N_COMB_MODE_ON = 1, N_COMB_MODE_P1_ALT = 2, N_COMB_MODE_COMB_ALT = 3 }

enum	{ N_RT_MODE_FIXREP = 0, N_RT_MODE_FIXREST = 1 }

enum	{ MAX_NUM_PHASE_CYCLE = 16 }

enum	{ NUM_DO_PORTS = 16 }
	of digital-pulse ports.

enum	{ PAT_DO_MASK = (1 << NUM_DO_PORTS) - 1, PAT_QAM_PHASE = (1 << NUM_DO_PORTS), PAT_QAM_PHASE_MASK = PAT_QAM_PHASE * 3, PAT_QAM_PULSE_IDX = PAT_QAM_PHASE * 4, PAT_QAM_PULSE_IDX_P1 = PAT_QAM_PULSE_IDX * 1, PAT_QAM_PULSE_IDX_P2 = PAT_QAM_PULSE_IDX * 2, PAT_QAM_PULSE_IDX_PCOMB = PAT_QAM_PULSE_IDX * 3, PAT_QAM_PULSE_IDX_INDUCE_EMISSION = PAT_QAM_PULSE_IDX * 4, PAT_QAM_PULSE_IDX_MASK = PAT_QAM_PULSE_IDX * 15, PAT_QAM_MASK = PAT_QAM_PHASE_MASK \| PAT_QAM_PULSE_IDX_MASK }
	for RelPatList patterns. More...

Static Public Member Functions inherited from XNode
template<class T__ >
static shared_ptr< T__ >	createOrphan (const char *name)

template<class T__ , typename... Args_>
static shared_ptr< T__ >	createOrphan (const char *name, bool runtime, Args_ &&...args)

Protected Types inherited from XPulser
enum	{ PORTSEL_UNSEL = -1, PORTSEL_GATE = 0, PORTSEL_PREGATE = 1, PORTSEL_GATE3 = 2, PORTSEL_TRIG1 = 3, PORTSEL_TRIG2 = 4, PORTSEL_ASW = 5, PORTSEL_QSW = 6, PORTSEL_PULSE1 = 7, PORTSEL_PULSE2 = 8, PORTSEL_COMB = 9, PORTSEL_COMB_FM = 10, PORTSEL_QPSK_A = 11, PORTSEL_QPSK_B = 12, PORTSEL_QPSK_OLD_NONINV = 13, PORTSEL_QPSK_OLD_INV = 14, PORTSEL_QPSK_OLD_PSGATE = 15, PORTSEL_PULSE_ANALYZER_GATE = 16 }
	indice for return values of portSel().

typedef FFT::twindowfunc	tpulsefunc